What is water treatment consultancy?
Water treatment consultancy is a professional service that helps industries select, design, optimize, and troubleshoot water and wastewater treatment systems such as RO, DM, ETP, STP, UF, softeners, and ZLD plants.
Why do I need a water treatment consultant?
A consultant helps reduce project risk, select the correct technology, improve water quality, save operating costs, and ensure compliance with pollution control regulations.
Which industries can benefit from water treatment consultancy?
- Chemical
- Pharmaceutical
- Textile
- Food & Beverage
- Power plants
- Engineering
- Packaging
- Hotels & Commercial buildings
- Electronics
- Automobile industries
What services are included in water treatment consultancy?
- Water analysis review
- Process selection
- Plant sizing
- P&ID and flow diagram
- Equipment specification
- BOQ preparation
- Vendor evaluation
- Cost estimation
- Troubleshooting
- Performance improvement
Can you help select the right RO plant?
Yes. Selection is based on flow, TDS, hardness, silica, recovery requirement, reuse objective, and budget.
Do you provide ETP and STP consultancy?
Yes. Consultancy is available for ETP, STP, MBBR, SBR, MBR, DAF, RO, ZLD, and sludge handling systems.
Can you review an existing plant?
Yes. Existing plants can be audited for capacity, performance, chemical consumption, recovery, energy use, and compliance.
What is a water audit?
A water audit identifies water consumption, losses, reuse opportunities, and cost-saving measures in an industrial facility.
Can consultancy help reduce water consumption?
Yes. Through recycling, reuse, high-recovery RO, condensate recovery, cooling tower optimization, and process improvements.
What is wastewater reuse consultancy?
It focuses on treating wastewater for reuse in cooling towers, gardening, flushing, utilities, and process applications.
Do you provide Zero Liquid Discharge (ZLD) consultancy?
Yes. ZLD consultancy includes RO, MEE, ATFD, condensate recovery, and salt management.
Can you help with GPCB/CPCB compliance?
Yes. We assist in designing systems to meet GPCB, CPCB, and client-specific discharge norms.
What information is required for consultancy?
- Water analysis report
- Flow requirement
- Existing process details
- Plant layout/space
- Reuse or discharge target
- Utility availability
Do you provide online consultancy?
Yes. Consultancy can be provided through WhatsApp, video call, email, and online meetings.
Can you visit our plant for inspection?
Yes. Site visits are available for survey, troubleshooting, commissioning support, and performance evaluation.
What is included in a technical proposal?
- Process description
- Flow diagram
- Equipment list
- Utility requirement
- Expected water quality
- Budgetary estimate
Can you prepare a BOQ for tendering?
Yes. Detailed Bill of Quantity (BOQ) and technical specifications can be prepared for procurement or tender purposes.
Do you help compare multiple vendors?
Yes. We provide technical comparison, compliance review, and commercial evaluation support.
Can you optimize chemical consumption?
Yes. We can optimize antiscalant, coagulant, flocculant, acid, caustic, and biocide dosing.
Can you improve RO recovery?
Yes. By reviewing pretreatment, scaling tendency, staging, and operating parameters.
Can you solve high COD or high TDS problems?
Yes. We provide process recommendations for high COD, high TDS, oil & grease, color, and difficult industrial effluents.
Do you provide commissioning support?
Yes. Support includes start-up, trial run, parameter setting, and operator guidance.
Can you train our operators?
Yes. Operator training can cover:
- Plant operation
- Regeneration
- Backwash
- Chemical handling
- Safety
- Troubleshooting
What is performance troubleshooting?
It is the diagnosis of issues such as:
- Low RO recovery
- High conductivity
- Membrane fouling
- Foaming
- Odor
- Sludge problems
- Poor treated water quality
Do you provide documentation?
Yes. We can provide:
- SOPs
- O&M manuals
- Log sheets
- Checklists
- Preventive maintenance schedules
Can consultancy help reduce operating cost?
Yes. Common savings come from:
- Lower chemical use
- Reduced water loss
- Lower power consumption
- Improved recovery
- Better automation
What is the difference between consultancy and turnkey supply?
| Consultancy |
Turnkey Supply |
| Advisory & design service |
Complete plant supply & execution |
| Independent evaluation |
Equipment + installation |
| Can work with any vendor |
Single responsibility execution |
Do you provide support after project completion?
Yes. We offer remote support, site support, AMC, troubleshooting, and performance review.
How long does a consultancy project take?
- Basic review: 1-3 days
- Technical proposal: 3-7 days
- Detailed engineering: 1-3 weeks
- Complex ZLD projects: as per scope
Why choose Vasudev Water Solution for consultancy?
- 22+ years water treatment experience
- Industrial RO, ETP, STP, DM & ZLD expertise
- Customized practical solutions
- Cost optimization approach
- Automation support
- Strong service network in Vapi, Silvassa, Daman, Gujarat & Maharashtra
